Concept2 OPV3860bc, Manual

Page: 67 / 74

67
OPV3860bc
EN
INSTALLATION OF THE APPLIANCE
Caution!
Risk of electric shock! Before installation, disconnect the power cord from the wall outlet. Otherwise there is a risk of
death or electric shock.
• Defects caused by improper installation are not covered by the warranty.
•
Installation is the responsibility of the customer not the manufacturer.
• The manufacturer bears no responsibility for damage caused to people, animals or property due to incorrect
installation.
• All guards must be placed firmly in their appropriate place in a way they cannot be removed without using special
tools.
• Install the appliance at least 650 mm over electric cookers or electric cooking plates and at least 750 mm over gas
cookers or gas cooking plates.
• Extracted air should not be led to a chimney intended for discharge of flue gases and combustion products or
a shaft serving for ventilation of rooms where fireplaces are situated.
•
A bend of the ventilation pipe should be ≥120°.
• The room must be well ventilated during cooking. Connection to the mains
• Make sure the mains voltage and current protection correspond to the values on the rating plate of the appliance.
• Only use grounded sockets.
• Do not use multiple sockets, plugs and extension cords.
•
The plug of the power cord on the appliance must be freely accessible even after the installation.
• Changes in a connection may only be performed by a qualified professional.
• Electrical safety of the appliance can be guaranteed only if the protective terminal of the appliance is connected to
the protective conductor of the mains.
• The manufacturer bears no responsibility for damage to persons or property as a result of missing or bad protective
connection.
Dimensions
595
265
530
45
28
0
320–
490
82
285
ø150
285