Concept2 OPV3760bc, Manual

Page: 52 / 56

50
EN
OPV3760bc
34
EN
OPV3260
EN
27 OPV3260
Fig. 4
Fig. 5 Fig. 6
7. For the airing mode, mount the backflow valve on the output hole, and connect the output hole of the fan to
the hole in the wall using flexible pipe (Fig. 5).
For the re-circulation mode fix only the flexible pipe to the output hole, and leave the outlet in the room
(Fig. 6).
Note: Flexible pipe is not supplied.
8. Mount the fat (or carbon) filter.
9. Plug the supply cable into the wall outlet.
Removal
Before removal, disconnect the power cable from the wall outlet, and follow the reverse steps to remove individual
parts of the unit.
34
EN
OPV3260
EN
27 OPV3260
Fig. 4
Fig. 5 Fig. 6
7. For the airing mode, mount the backflow valve on the output hole, and connect the output hole of the fan to
the hole in the wall using flexible pipe (Fig. 5).
For the re-circulation mode fix only the flexible pipe to the output hole, and leave the outlet in the room
(Fig. 6).
Note: Flexible pipe is not supplied.
8. Mount the fat (or carbon) filter.
9. Plug the supply cable into the wall outlet.
Removal
Before removal, disconnect the power cable from the wall outlet, and follow the reverse steps to remove individual
parts of the unit.
35
EN
OPV3260
EN
28 OPV3260
SERVICE
Bulb replacement
Before replacement, let the bulb cool down. There is a risk of burning.
For the replacement, proceed as follows:
• Pull the power cord out of the mains outlet or switch off the circuit breaker of the unit’s mains
outlet.
• Replace the bulb as shown below (Fig. 7, Fig. 8)
•
Always replace with a bulb of the same type (2 x 3 W LED).
Any extensive maintenance or repair that requires access to the inner parts of the product must be performed by an expert
service centre.
ENVIRONMENTAL PROTECTION
• Packaging materials and obsolete appliances should be recycled.
• The transport box may be disposed of as sorted waste.
• Polyethylene bags shall be handed over for recycling.
Appliance recycling at the end of its service life:
A symbol on the product or its packaging indicates that this product should not go into household waste.
It must be taken to the collection point of an electric and electronic equipment recycling facility. By making
sure this product is disposed of properly, you will help prevent the negative effects on the environment
and human health that would otherwise result from inappropriate disposal of this product. You can learn more about
recycling this product from your local authorities, a household waste disposal service or in the shop where you bought
this product.
JDR GU10 3W
JDR GU10 3W
Fig. 7 Fig. 8