Concept2 OPV3660, Manual, Page: 68 / 76

68
OPV3660
EN
When installing the appliance, follow these steps:
1. Remove all the packaging and marketing materials before
first use.
2. Mark the required installation height (500 mm for electric
and 500 mm for gas cooking plates) on the wall behind the
cooker or the cooking plate (Fig. 4).
3. Draw a vertical line to mark the centre of the cooking plate
(of the cooker).
4. Drill holes and attach the hood according to Fig. 5 or Fig. 6.
5. Make sure that the hood is in the horizontal position in
order to prevent grease (fat) from accumulating on one
side of the appliance (Fig. 7).
6. After the hood has been hung, install the flexible outlet
duct to the outlet opening (Fig. 8). Use a reducer fitting
150/120 mm in diameter, if required. Insert the second
part of the flexible duct in the opening prepared in the
wall.
7. Plug the power cord into the wall outlet.
Fig. 4
Fig. 5
25
Min.
500 mm
Min.
500 mm