Concept2 OPV3660, Manual

Page: 66 / 76

66
OPV3660
EN
Connection to the mains
•
Make sure the mains voltage and current protection correspond to the values on the rating plate of the appliance.
•
Only use grounded sockets.
•
Do not use multiple sockets, plugs and extension cords.
• The plug of the power cord on the appliance must be freely accessible even after the installation.
• Changes in a connection may only be performed by a qualified professional.
• Electrical safety of the appliance can be guaranteed only if the protective terminal of the appliance is connected to
the protective conductor of the mains.
•
The manufacturer bears no responsibility for damage to persons or property as a result of missing or bad protective
connection.
Replacing the front moulding
•
The front stainless steel moulding is removable from this type of hood and therefore replaceable with a wooden
one of the same design as your kitchen unless it has the same dimensions.
•
This bar is not included in the package; it has to be custom-made by a carpenter or a kitchen studio.
• The sliding kitchen hood will become a part of the style of your kitchen.
• The dimensions of the stainless steel moulding are: 595 x 42 x 23 mm (W x H x D)
• The stainless steel moulding is easily detachable from the hood by unscrewing three screws, see Fig. 3.
•
To attach a new custom-made moulding proceed the same steps in reverse order.
Fig. 3