Concept2 OPI5060bc, Manual

Page: 62 / 68

62
EN
OPI5060bc
When installing the appliance, follow these steps:
1. Remove all the packaging and marketing materials before first use.
2. Mark the required installation height (550 mm for electric and
650 mm for gas cooking plates) on the wall behind the cooker or the
cooking plate (Fig. 3).
3. Remove the six screws and remove the bottom of the hood as shown
in Figure 4.
4. Attach the top of the hood to the cabinet with four screws and then
attach the bottom of the hood as shown in Fig. 5 and 6.
5. Drill holes and attach the hood according to Fig. 6.
6. After the hood has been hung, install the flexible outlet duct to the
outlet opening (Fig. 7). Use a reducer fitting 150/120 mm in diameter,
if required. Insert the second part of the flexible duct in the opening
prepared in the wall.
7. Plug the power cord into the wall outlet.
Fig. 3
Fig. 4
Fig. 5
550 mm
650 mm