Concept2 OPI3075, Manual

Page: 50 / 56

50
EN
OPI3075
When installing the appliance, follow these steps:
1. Remove all the packaging and marketing materials before first use.
2. Mark the required installation height (500 mm for electric and
500 mm for gas cooking plates) on the wall behind the cooker or the
cooking plate (Fig. 3).
3. Drill holes and attach the hood according to Fig. 4.
4. After the hood has been hung, install the flexible outlet duct to the
outlet opening (Fig. 5). Use a reducer fitting 150/120 mm in diameter,
if required. Insert the second part of the flexible duct in the opening
prepared in the wall.
5. Plug the power cord into the wall outlet.
Disassembling
If you disassemble the appliance, it is important to follow the steps in the correct order:
1. First, unplug the power cord from the mains (pull the plug out or switch off the circuit breaker).
2. Subsequently disassemble individual parts of the hood in reverse order of the appliance installation.
Fig. 3
Fig. 4 Fig. 5