EN
75
MNV6560
Then attach movable rails to the front panel and bottom of the dishwasher to the bottom bar (Fig. 15). After placing the
dishwasher to the right place you can set the dishwasher so it is fl ush to the surrounding cabinets (Fig. 16). You can stick
to what the surrounding cabinets (Fig. 17).
Fig. 16
Fig. 18
Fig. 17
Drain hose connection
Connect the drain hose:
a) to the drain tube 40 mm in diameter with a vent,
b) or use the supplied adapter allowing drainage into a sink tub or a bathtub.
Note:
When used, the adapter must be fi xed properly. Otherwise, it may come loose and water may spill on the fl oor.
c) or use the siphon side hose of the sink or basin. Fix the hose to the lower side of the worktop. Thus, the water is
prevented from fl owing back into the dishwasher.
The end of the drain hose should be 400–1000 mm (Figure 17) above the fl oor, and not immersed in water to prevent
water back fl ow.
Make sure the hose is not bent or jammed to prevent the water supply from becoming reduced or stopped.
