Concept2 MNV5860, Manual

Page: 153 / 163

154
EN
MNV5860
When installing the appliance, follow these steps:
1. Remove all the packaging and marketing materials before first use.
2. Fasten the cover plate to the appliance door. Use the fastening screws and brackets.
3. You adjust the strength of the springs (left and right) using the screws located on the bottom part of the front
of the dishwasher (Pic. 16). To increase the strength turn clockwise. To decrease the strength turn counter
clockwise.
4. Connect the inlet hose to the water supply according to Pic. 18.
5. Connect the drain hose according to Pic. 19.
6. Stick the condensation belt under the kitchen top (step 3). Make sure that the condensation belt is stuck
alongside the edge of the kitchen top.
7. Place the dishwasher into the prepared space.
8. Use the feet at the front and back of the appliance to level it to a horizontal position. Adjust the back feet by
turning the screw on the bottom of the front side of the appliance (step 5). Adjust the front feet by turning
screws located near the feet themselves (step 5B). Use a spirit level Pic. 17).
9. Plug the power cord in the wall outlet.
10. The appliance must be secured after placing and levelling it. Securing the appliance can be done in two ways:
A – Attaching to a standard kitchen top:
Place the installation hook into the hole located on the top of the appliance.
Screw the installation hook to the kitchen top (step 6).
B – Attaching to a marble or granite work top:
Screw the sides of the dishwasher to the cabinets (step 7).
Condensing belt
Cover plate