Concept2 MNV4160, Manual

Page: 152 / 170

152
EN
MNV4160
Filtration system
The filtration system at the bottom of the dishwasher retains coarse dirt from the washing cycle. The accumulated
coarse residues may cause clogging of the filters. Check the filters regularly and clean them under running water if
necessary. Follow the steps below to clean the dishwasher filters:
1. Grasp the coarse filter and unlock it by turning
it counter-clockwise. Pull the filter upwards.
2. The fine filter can be pulled from the bottom
of the filter assembly. Separate the coarse filter
from the main filter by gently pressing the
tabs at the top and pulling it out.
3. Larger food residues can be cleaned by rinsing
the filter under running water. Use a soft
cleaning brush for more thorough cleaning.
4. Then reassemble the filters. Proceed in the
reverse order to their disassembly. Put the
filter assembly back into the dishwasher
and turn it clockwise. Check that the filter is
properly closed by the position of the arrow
for closed filter.
Coarse filter
Main filter
Fine filter
Note:
Do not over tighten the filters. Reassemble the filters in the correct order, otherwise coarse dirt may enter the system
and cause clogging. Never use the dishwasher without the filters inserted properly. Improper filter placement can
reduce the performance of the appliance and damage dishes and cutlery.