EN
22
PRODUCT DESCRIPTION
1. Air outlet grille
2. Transport handle
3. Thermostat control
4. Mode selector
5. Ventilator grille
6. Air inlet grille
7. Anti-slip feet
NOTE
When turning the unit on for the first time or after prolonged downtime the unit may release a slight smell. This smell
will go away after a short time.
• Do not touch the unit with wet or damp hands.
•
Do not immerse the power cord, plug, or unit in water or any other liquid.
• The unit should not be fixed to the wall.
• The unit should not be used in means of transport.
• Do not repair the appliance yourself. Contact an authorized service center.
Failure to follow the manufacturer‘s instructions may cause refusal of warranty repair.
ASSEMBLY
Before the first use it is necessary to fix the anti-slip feet to the bottom to increase stability of the unit, and allow the air
to flow towards the inlet grille.
The unit should not be operated without duly mounted feet.
1. Place the unit on a stable surface (e.g. desk).
2. Put the feet on the unit‘s body so that the feet projections fit in the
holes in the body.
3. Fasten the feet to the body using bolts.
2
4
3
7
5
6
7
1
KS 3000, KS 3001, KS 3002, KS 3003
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliances by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
