Concept2 IDV5360, Manual

Page: 95 / 106

95
EN
IDV5360
Switching OFF the cooking zone
1. Press the symbol for hotzone selection (2) to activate the hotzone (number of the selected hotzone is blinking).
Set the power level to „
0
“ by pressing or moving your finger over the slider (1).
2.
By pressing the ON/OFF button (5) you can turn off the hob.
Note:
• After switching off the hob the “ H ” symbol can be displayed, which indicates that the used cooking zone is still
hot and there is a risk of serious burns. Never touch these cooking zones!
•
Symbol “
H
” disappears, when the used cooking zone cools down to a safe temperature (that is not too hot to
touch).
• If the “ H ” symbol is light up on the control panel, it is possible to use the residual heat e.g. for heating up another
cookware.
Switching OFF the hob
•
By pressing the ON/OFF button (5) you can turn off the induction hob. All the settings will be reset.
Note:
•
If all the cooking zones will be switched off and within 1 minute the control panel will not be touched the
induction hob will switch off automatically.
• For safety reasons, the automatic switch off (cooking time) on individual cooking zones is limited to 8 hours
(power level 1–3), 4 hours (power level 4–6) or 2 hours (power level 7–9).
•
The induction hob deactivates automatically even when any cooking zone does not detect any cookware after
2 minutes.
ADVANCED FEATURES
POWERBOOST function
This function enables the heating of food even faster than at the highest power setting of the heating plate. The
powerbooster function will increase the power of the highest heating level for a short time on the choosen hotzone.
1. Press the symbol for hotzone selection (2) to activate it (number of the selected zone is blinking).
2. Press the symbol (7) to switch on the Powerbooster function. The letter „
b
“ will be displayed.
3. The Powerbooster function will be automatically deactivated after 5 minutes, unless deactivated earlier
manually.
To deactivate this function:
1. Press the symbol for hotzone selection (2) to activate it (number of the selected zone is blinking).
2. Press the symbol (7) for Powerbooster or press or move your finger over the slider (2) to switch off the
Powerbooster function. The letter „
b
“ from the display disappears. Thus the Powerboost function is deactivated.
Note:
• The POWERBOOST function can be used at any cooking zone.
•
The Powerbooster function will reduce the power level of other hotzones to prevent power overload of the
heating plate.
• If there is no change in the selected cooking zone within 5 minutes of activating the POWERBOOST function, the
cooking zone will be set to the power level at which it was set before activating the POWERBOOST function.
• In case the power level of the selected cooking zone was set to “ 0 ” before activating the POWERBOOST function,
the power level of the cooking zone will be set to “
9
” within 5 minutes of no activity.