Concept2 IDV2260, Manual

Page: 60 / 74

60
IDV2260
EN
The manufacturer reserves the right of possible technical changes, misprints and differences in pictures without
previous notice.
IMPORTANT NOTICES:
Delivery
•
Check the package and unit immediately after delivery for any damage that may have occurred during shipping.
• If the unit is damaged, do not operate it. Contact the supplier as soon as possible.
• Remove all the covering and marketing materials from the unit before the first use.
• Dispose of the packaging material properly.
Installation
•
The appliance is designed to be built into a kitchen countertop.
• The lower edge of the cooktop base is fitted with a watertight seal.
• Follow the instructions for the appliance connection and installation.
• The unit has to be disconnected from the power socket during installation.
•
Before connecting the appliance, ensure that your local connection is earthed and compliant with all applicable
regulations.
• Make sure the mains voltage and current protection correspond to the values on the rating plate. Use earthed wall
outlets only.
• After installation of the unit its plug or circuit breaker shall be freely accessible.
•
Only an authorized technician may install and connect your appliance.
• Improper connection and/or incompetent installation may result in injury or death.
• The manufacturer takes no responsibility for any damage incurred due to improper installation or use.
Normal operation
•
Use the unit only as described in this operating manual.
• Use the unit in a household to heat or prepare food only.
• Do not touch hot surfaces when using the cooktop or after.
• Do not touch the unit with wet or damp hands.
• In case of any failure turn off the product and disconnect the plug from the mains outlet or switch off the circuit
breaker.
• Never pull the cord to disconnect the plug from the socket; hold the plug instead.
• Check the appliance and power cord for damage regularly. Never switch on a damaged appliance.
TECHNICAL PARAMETERS
Voltage 220 – 240 ~ 50/60 Hz
Max. input 6400 W
Diameter and input of the front left hotzone ø 160 mm, 1400 W
Diameter and input of the rear left hotzone ø 180 mm, 1800 W
Diameter and input of the rear right hotzone ø 160 mm, 1400 W
Diameter and input of the front right hotzone ø 180 mm, 1800 W
External dimensions (w × d × h) 590 x 520 x 60 mm
Installation dimensions (w x d x h) 560 x 490 x 52 mm
Weight 10.2 kg
Sound power level of fan < 60 dB(A)