Caution!
Be careful when manipulating the door during cleaning. The hinges are designed to the weight of all 3 glass
panes. If you remove one or both of the glass panes, the weight of the door is reduced and it can get closed
unintentionally, which can lead to damage of the glass panes.
Note:
1. For cleaning the glass panes, use a soft sponge and anti-grease detergent and then rinse them under
running water. Never wash the glass panes in a dishwasher!
2. The middle glass is fitted with rubber pads at the corners. When removing, be careful not to lose them.
These rubber pads prevent unpleasant vibrations when the fan function is turned on.
APPLIANCE INSTALLATION
•
Do not lift the appliance by holding it by
the handle of the door!
•
Defects caused by incorrect installation
are not covered by the warranty.
• Only the customer, not the manufacturer, is
responsible for the appliance installation.
• The manufacturer bears no responsibility
for damage caused to people, animals or
objects as a result of incorrect installation.
• To ensure correct function of the appliance,
install it in suitable furniture.
• The unit should be installed in standardi-
sed kitchen furniture designed for built-in
appliances or in properly adapted furniture
of dimensions according to Fig. 6.
• The appliance may be located either under
a kitchen cabinet or in a stand-alone cabi-
net (Fig. 6).
• The kitchen furniture must be made of
heat-resistant material (at least 120 °C). The materials and used glues must be resistant to the warming of
the unit according to the ČSN EN 60335-2-6 standard. Materials and glues which do not meet the stated
standard may deform or come unstuck.
• All the protective covers must be fixed at their positions so that it is not possible to remove them without
using a special tool.
• The rear board of the kitchen unit must be removed to ensure proper circulation of air around the
appliance.
• If a cook top is above the appliance, a gap of at least 50 mm must be between them.
18
18
0
13
600
595
585
560
560
50
min.
570
min.
570
555
560
595
595
20
Fig. 6
EN
75
ETV7160
Summary of Contents for ETV7160
Page 2: ......
