C
LEANING AND MAINTENANCE
Cleaning After Use
CAUTION
:
To
avoid
burn
injury,
do
not
refill
water
tank
before
steam
cleaner
has
cooled
completely.
Be
careful
when
removing
water
fill
safety
cap.
Even
when
cap
is
able
to
be
turned
the
steam
cleaner
may
still
be
hot,
especially
the
metal
surfaces.
IMPORTANT
:
Make
sure
safety
cap
is
tightened
securely
before
use
or
for
storage.
1. After the steam cleaner is used, press the power button to turn power “OFF” and then unplug the power
cable from wall outlet.
2. Press down the steam trigger to release all pressure.
3. It takes about 7-10 minutes to the steam cleaner to cool down, the safety cap will drop totally. If it do
not drop after 10 minutes, release the remaining pressure by pressing the steam discharge button
again. Turn clockwise to unscrew the filler cap and remove the cap gently. DO NOT EXCEED THE FILLING
OF THE FILLING HOLE. Allow the steam cleaner to cool for another 5 minutes. After the steam cleaner has
cooled down and the pressure is reduced in the appliance, the filler cap will easily release. Fully unscrew
the filler cap.
4. Empty the water tank and let it dry. Dry the outer surface of the steam cleaner with a dry cloth. Allow
it to dry freely. Then fit the cap on and screw it firmly in the clockwise direction.
5. DO NOT OVERTIGHTEN
THE SAFETY
CAP.
Cleaning microfiber cloth:
1. Cloth is washable. Always use a mild detergent.
2. For
best
results,
let the cloth to
dry.
IMPORTANT
:
Allow
the
steam
cleaner
to
fully
cool
down
before
performing
any
maintenance
or
troubleshooting
checks.
IMPORTANT
:
Never
use
bleach
or
fabric
S
TORAGE
1. Remove the power cord from the socket.
2. Press down the steam trigger to release all pressure.
3. It takes about 7-10 minutes to the steam cleaner to cool down, the safety cap will drop totally. If it do
not drop after 10 minutes, release the remaining pressure by pressing the steam discharge button
again. Turn clockwise to unscrew the filler cap and remove the cap gently. DO NOT EXCEED THE FILLING
OF THE FILLING HOLE. Allow the steam cleaner to cool for another 5 minutes. After the steam cleaner has
cooled down and the pressure is reduced in the appliance, the filler cap will easily release. Fully unscrew
the filler cap.
4. Empty the water tank and let it dry. Dry the outer surface of the steam cleaner with a dry cloth. Allow
it to dry freely. Then fit the cap on and screw it firmly in the clockwise direction.
5. DO NOT OVERTIGHTEN THE SAFETY CAP.
6. Leaving a solution residue in the cleaning agent tank will not affect future performance.
7. Store upright in a protected, dry area. Keep water funnel and measuring jug for future use.
EN
C
P 1010
83
