Attach the weatherproof sealing pad to the base of
the dome with the sticky side against the camera
Using the supplied fitting screws, securely attach the
camera to the drilled surface
Please note:
To ensure correct weatherproof you
must use the enclosed fitting screws and
weatherproof washers
Adjust the tri-axis gimbal zoom/focus to give the
required image of the area to be monitored.
Replace the dome cover and tighten the dome cover
screws using the supplied dome cover screw driver
Carefully clean the dome surface with a soft lint
free cloth
Remove the camera unit carefully from the box
reserving the accessory contents in a safe place
Use the supplied mounting template to mark the
space for drilling
Remove the dome cover using the supplied dome
cover screwdriver
CONNECTION
Connect the video out port to your video cable
running to the monitor / recorder
Check the power supply is of the correct level
and connect your power supply into the power
port on the Camera.
View the picture on a monitoring device to
check the power and video connection is
working properly.
PSU
Troubleshooting
Ensure all power and cable connections are correct with the Camera and DVR.
If all power and cable connections are correct and the camera picture can not be
produced then contact your supplier for technical support.
Tri-Axis Gimbal
Example shows vandal resistant dome casing
360º
90º
360º
