Important: Ensure all cautionary procedures are
observed during installation.
It is recommended the camera is tested during the most
demanding environmental conditions such as low light
or bright sunlight to ensure continuity of effective CCTV
monitoring.
Attach the weatherproof sealing pad to the base of
the dome with the sticky side against the camera
Using the supplied fitting screws, securely attach the
camera to the drilled surface
Please note:
To ensure correct weatherproof you
must use the enclosed fitting screws and
weatherproof washers
Adjust the tri-axis gimbal zoom/focus to give the
required image of the area to be monitored.
Replace the dome cover and tighten the dome cover
screws using the supplied dome cover screw driver
Carefully clean the dome surface with a soft lint
free cloth
Remove the camera unit carefully from the box
reserving the accessory contents in a safe place
Use the supplied mounting template to mark the
space for drilling
Remove the dome cover using the supplied dome
cover screwdriver
FIXING TO A WALL
CVP Range
PACKING CONTENTS
Wall Plugs
X4
Conduet hole cover
opener
X1
Mounting Template
X1
Fitting Screws
X4
Dome cover
screwdriver
X1
Weatherproof
sealing washers
X8
Weatherproof
sealing pad
X1
Ceiling
CVP Range
VANDAL RESISTANT DOME INSTALLATION
Using the supplied fitting screws, securely attach the
camera to the drilled surface
Adjust the tri-axis gimbal zoom/focus to give the
required image of the area to be monitored.
Replace the dome cover by pushing firmly in place
onto the base
Carefully clean the dome surface with a soft lint
free cloth
Remove the camera unit carefully from the box
reserving the accessory contents in a safe place
Use the supplied mounting template to mark the
space for drilling
Remove the dome cover using a suitable coin or
screwdriver
