Concept Pro CBP4304, User Manual

Page: 5 / 10


Attach the weatherproof sealing pad to the base of
the dome with the sticky side against the camera

Using the supplied fitting screws, securely attach the
camera to the drilled surface
Please note: To ensure correct weatherproof you
must use the enclosed fitting screws and
weatherproof washers

Adjust the tri-axis gimbal zoom/focus to give the
required image of the area to be monitored.

Replace the dome cover and tighten the dome cover
screws using the supplied dome cover screw driver

Carefully clean the dome surface with a soft lint
free cloth

Remove the camera unit carefully from the box
reserving the accessory contents in a safe place

Use the supplied mounting template to mark the
space for drilling

Remove the dome cover using the supplied dome
cover screwdriver
CONNECTION

Connect the video out port to your video cable
running to the monitor / recorder

Check the power supply is of the correct level
and connect your power supply into the power
port on the Camera.

View the picture on a monitoring device to
check the power and video connection is
working properly.
PSU
Troubleshooting

Ensure all power and cable connections are correct with the Camera and DVR.

If all power and cable connections are correct and the camera picture can not be
produced then contact your supplier for technical support.
Tri-Axis Gimbal
Example shows vandal resistant dome casing
360º
90º
360º