12
CT Belt Adjustment
A
•
To adjust the belt tension tighten or slacken the bolt
A
until the desired
tension has been made
•
Undo counter bolts
B
and raise or lower the gearbox in order to make the
side shaft square with the side of the mower
• If the gearbox has been raised or lowered by quite a difference then the side
shaft guard will need to be moved and made square. To do this slacken bolts
C
and move the guard up or down and then tighten
C
C
XT YT Belt Adjustment
A
B
C
•
Slacken bolts
D
which are situated inside the
side shaft guard
•
Adjust bolt
B
as desired in order to obtain the
correct tension
•
Via bolts
A
move the gearbox so that the side
shaft is parallel to the ground and then tighten
A
•
Slacken
C
in order to manoeuvre the side shaft
guard so that this too is parallel with the ground,
then tighten
D
and
C
D
B
B
Summary of Contents for CT 110
Page 15: ...15...
