Concept LED Lights Ltd
01553 617591 / 08711 339037 [email protected]
Installation Procedure
:
Before installing any product, you should completely read through the guide that was
shipped with the product.
1. Carefully remove all items from the package and install on a secure foundation.
2. Connect the V-
PIX™ Quad Bar to the output of the AC power using a standard cable.
Clear/Frost Filter Installation
:
The V-
PIX™ Quad Bar includes a frost filter already installed. Follow the procedure below to
install the clear filter.
1. Locate the end cap of the product that does not have the connecting hardware.
2. Remove the 4 screws from the end cap of the product.
3. Remove filter.
4. Re-install end cap
Be sure to install the frost filter with the shiny side facing toward the LEDs
