8
MESSAGE PLAYBACK
When the message indicator flashes,
pauses, and repeats you have received
messages. The number of flashes
indicates the amount of messages
received (up to 10)
1. Press and release the PLAY
MESSAGES control on your unit.
2. The unit will automatically playback
your messages in the order they were
received.
3. A beep tone will be heard at the
end of each message.
4. You unit will automatically stop after
the last message.
5. New incoming messages will replace
old messages unless you follow the
SAVE procedure.
Press and release the STOP/SAVE
control. Your unit will reset to answer
incoming calls and save all messages.
To Hear Your Message
To Stop Playback of Incoming
Messages
To Repeat Current Message
During playback, press and release the
REPEAT control once quickly.
During playback, press the REPEAT
control twice within 2 seconds.
To save your messages after listening
to them.
A. During playback, press and release
the STOP/SAVE control. Your unit will
reset to answer incoming calls and
save all messages.
or
To Playback the Previous Messages
To Save Your Message
B. After the last message and two
beep tones, press and hold the STOP/
SAVE control for 2 seconds. All
messages will be saved and the
message counter will flash indicating
the number of messages received.
You must follow the above SA VE
procedure each time you listen to your
incoming message and before the
system answers a new incoming call.
IMPORTANT
SPECIAL FEATURES
Message Capacity Full Detection
Your unit will signal the caller when the
message capacity is full. The unit will
answer the phone after 10-11 rings,
emit 3 beeps tones, pause 10 seconds ,
and then disconnect the telephone line
automatically.
Voice Activated Recording (VOX)
Your unit records voice for up to 45
Seconds as long as the caller speaks.
To avoid unnecessary pauses due to
hangups and to save message
capacity, your unit automatically stops
recording after 7 seconds of silence.
To listen to an incoming call without
picking up the phone, let your unit
answer the phone when it rings.
Call Screening
