KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER
™
BY CONAIR
®
KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER
™
BY CONAIR
®
KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER
™
BY CONAIR
®
KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER
™
BY CONAIR
®
BANGS
Curved bangs
1. Select the vertical position for the straightener attachment.
2. Separate a section of hair about 1½" wide. Place dryer
(detangling comb facing out) under the section of hair.
3. With a slight twisting motion of the wrist, turn the appliance upward
to lift the roots and slide it slowly over the ends.
4. Hold for 5 to 10 seconds: the Tourmaline Ceramic
™
and fl ocked disks work best this way.
5. Repeat if necessary and fi nish with a shot of cool air on the section of hair for perfect hold.
ROOTS
1. Select the vertical position for the straightener attachment.
2. Separate a section of hair about 1½" wide. Hold the dryer (detangling
comb facing out) under the section of hair and place it at the roots
ensuring that the teeth penetrate the hair fully.
3. Gently pull the dryer to about 1" from the roots and turn under: this will
give the action of the Tourmaline Ceramic
™
and fl ocked disks maximum effect.
4. Hold the dryer parallel to your scalp for 5 seconds.
5. Then slide the appliance slowly towards the ends.
6. Repeat if necessary and fi nish with a shot of cool air on the section of hair for perfect hold.
STRAIGHTENING AROUND THE CONTOURS OF THE FACE
Select the diagonal position for the straightener attachment. Then follow
instructions under 2, 3, 4, 5 and 6 described above.
06NP086 208 IB.indd 22-23
06NP086 208 IB.indd 22-23
3/22/06 4:04:54 PM
3/22/06 4:04:54 PM
