the longest trim setting adjustment. (You
can always go back and cut your mustache
more closely with a shorter
setting.)
ALWAYS TRIM YOUR
MUSTACHE FROM
THE TOP DOWN
4. After your mustache has been trimmed to
the desired length, remove the 5-position
comb and, using the blades only, define the
outline of the bottom of your mustache.
5. Use the precision goatee trimmer blade for
fine detailing and hair art.
ROTARY NOSE & EAR TRIMMER
For easy, safe grooming of long nose and ear
hairs, attach the rotary nose/ear trimmer and
hold unit to areas that need trimming.
1. Make sure the trimmer on/off switch is in
the "off" position
2. Detach normal trimming
blade (see "Repl-acement
(Removal) of Blade Set"
instructions)
3. Installing the nose & ear
trimmer
4. Insert the pin of the trimmer
body into the hexagonal hole
of the trimmer head as shown
in Fig.1
5. Press and snap the trimmer
head onto the body as shown
in Fig.2
6. Detaching the nose & ear trimmer
BLENDING THE JAWLINE
1. The two jawline attachments (jawline
AC12 provides 7 mm and jawline AC13
provides 5 mm) will help you to achieve
a neat, finished trim under your chin. To
use one of the attachments, press it down
over the trimmer blades until it clicks into
position.
2.Hold the trimmer in an upright position and
begin trimming under your jawline, using
short, even strokes.
3.After your beard is blended, turn off the
trimmer and remove the attachment by
gently pulling up on tab.
TO TRIM YOUR MUSTACHE
1. For best results, start with a clean, slightly
damp mustache.
2.Comb through your
mustache in the
direction it grows.
3.Place the 5-position
comb over the facial hair blade and snap it
into position. It is a good idea to start with
Fig.3
Fig.1
Fig.2
