be slightly damp (NOT WET) when using your
trimmer. This will prevent the trimmer from
removing more hair than desired.
TYPES OF BEARDS/MUSTACHES
GETTING STARTED:
OUTLINING YOUR BEARD
1. It is always best to begin with a clean, slightly
damp beard.
2. After you have combed through your beard in
the direction it grows naturally, you will want
to outline the desired shape, beginning under
your jawline.
3.Begin defining your
beard’s shape under
your chin and work
upward on each side of
your face toward your
ears. Then define the upper outline of your
beard across your cheeks, past your sideburns,
and toward your hairline.
NOW YOU’RE READY
TO TRIM YOUR BEARD
1. The trimmer includes a five position comb for
use with the hair trimming blade (2-10mm)
which provide lengths of 3/32" (shortest) to
3/8" (longest).
2. To use the 5-position comb, slide the unit over
the trimmer blades and snap it down into
position. At first, until you become familiar
with the adjustments, use the longest trim
setting. (You can always go back and make
your beard a little shorter.)
3. Begin trimming your beard using smooth,
even strokes. Start
with your sideburns
and work downward
toward your chin.
(Never attempt to trim
against the natural
growth of your beard because the hair will
be cut too short.)
4. If you decide you want a closer trim, you
can now adjust the
5-position comb
attachment to a shorter
setting (such as 3/32" or
5/32") and go over your
beard again until you achieve the desired
length.
HOW TO GET THE STUBBLE LOOK
This trimmer includes 5 stubble combs.
These combs allow you to achieve 15
different looks of stubble or shadow looks
to your already existing growth. Simply use
comb #1-#5 for any look you would like to
achieve. You can also use the taper control,
which has 3 settings. Combined with 5 total
stubble combs you can achieve your 15
different looks. Each comb has a different
length. Comb # 1 is closest to the skin of
the face while comb # 5 is farthest off the
face. Customizing a different look each day!
The stubble combs fit on the blade just like
the jawline combs, note blending the jawline
section for specifics on how combs/jawline
combs go on.
