SCA
N
FU
NC
C
A
L
L
CH
22
MIC
INSTALLATION
Removing the Belt Clip
Installing the Belt Clip
1.) BELT CLIP LATCH
FIGURE 1
(REAR VIEW)
FIGURE 2
(REAR VIEW)
BELT CLIP SLOT
2.) BELT CLIP
1. Pull the BELT CLIP LATCH (1) away from the unit.
2. While pulling the BELT CLIP LATCH (1), push up on the BELT CLIP (2)
to remove it from the unit, as shown in Figure 1.
1. Slide the BELT CLIP into the BELT CLIP SLOT as shown in Figure 2.
BATT 1
BATT 1
BATT 2
BATT 2
FRS1
FRS1
FRS 2
FRS 2
MAXIMUM RANGE PERFORMANCE
MAXIMUM RANGE PERFORMANCE
SAFETY INSTRUCTIONS FOR BATTERIES
CONTAINS NICKEL-CADMIUM BATTERY.
BATTERY MUST BE RECYCLED OR
DISPOSED OF PROPERLY.
CAUTION: To reduce the risk of fire or personal injury, read and follow these
instructions.:
1. Use only a CONAIR approved battery pack in FRS316.
a. GP35AAAK4BX 4.8V 350mA GPI International Ltd. or
b. JB35AAANC4BC 4.8V 350mA JB Energy (HK) Ltd.
2. Do not dispose of the battery in a fire, as it may explode. Check with local
codes for possible special disposal instructions.
3. Do not open or mutilate the battery. Released electrolyte is corrosive and
may cause damage to the eyes and skin. It may be toxic if swallowed.
4. Exercise care in handling batteries in order not to short the battery with
conducting materials such as rings, bracelets and keys. The battery or
conduction material may overheat and cause burns.
5. Charge the battery (ies) provided with or identified for use with this product
only in accordance with the instructions and limitations specified in this
manual.
6. Observe proper polarity orientation between the Battery Pack and battery
charger.
natural resources.
CONTROLS DIAGRAM
CHARGE LED Indicators
BATTERY Cavity
FRS Cavity
POWER-IN CONNECTION Jack
(Located on the rear side)
FRS Cavity
- Used to charge the FRS unit. The FRS unit should be in upright position.
BATTERY Cavity
- Used to charge the NI-Cd rechargeable battery pack (included).
POWER-IN CONNECTION Jack
CHARGE LED Indicators
- Illuminates in red when the Ni-Cd rechargeable battery or
the FRS unit is being charged.
DESKTOP CHARGER
FRS316 UNIT
DESCRIPTION
7
4
5
6
BELT CLIP
(Located on the rear side)
FUNC (FUNCTION)
POWER
PTT (Push
To Talk)
CALL
UP / DOWN
SPEAKER
BATTERY COVER LATCH
(located on the rear side)
MIC
SCAN
MON(MONITOR)
LCD
ANTENNA
BATTERY
COMPARTMENT
(on the rear side)
TX LED
EAR/MIC JACK
Belt Clip
-
For your convenience, a removable belt clip is included to secure the radio to
a belt, pocket, or any other convenient location.
Power Button
-
Press and hold the power button to turn your unit ON/OFF.
Transmit (TX) LED
-
Illuminates in red when transmitting (TX).
PTT (Push To Talk) Button / Switch
-
Used for transmitting (making a call).
Mon (Monitor) Button
-
Lets you listen in on a channel for weak signals.
Func (Function) Button
-
Allows you to change channels. Press and hold for 5 seconds
to LOCK the buttons.
Battery Cover Latch
-
Secures the battery cover in place.
alkaline batteries (not included).
Scan Button
-
Used to activate/deactivate the channel scan.
LCD (Liquid Crystal Display) Panel
-
A multi-functional display which shows channels
and other radio status/icons.
Antenna
- This is a fixed antenna.
Call Button
-
Send call tones for alert or identification purposes.
Up ( ) and Down ( ) Buttons
-
Used for adjusting the volume level and changing
the channel.
Ear/Mic Jack
-
This jack is used for optional accessories with Ø2.5mm stereo plug (not
included).
