background image

IMPORTANT SAFETY 

INSTRUCTIONS

When  using  electrical  appliances,  espe-

cially  when  children  are  present,  basic 

safety precautions should always be taken, 

including the following:

READ ALL INSTRUCTIONS 

BEFORE USING

DANGER  —

  Any  appliance  is 

electrically live even when the switch is off.

To  reduce  the  risk  of  death  by  electric 

shock:

1. Always  “unplug  it”  immediately  after 

  using.

2. Do not place or store appliance where it 

  can fall or be pulled into a tub or sink.

3. Do not place in, or drop into water or 

  other liquid.

4. If an appliance falls into water, “unplug 

  it” immediately.  

Do not reach into the 

  water.

WARNING  —

  To  reduce  the 

risk of burns, electrocution, fire, or injury 

to persons:

1.  This  appliance  should  never  be  left 

  unattended when plugged in.

2.  Close  supervision  is  necessary  when 

  this  appliance  is  used  by,  on,  or  near 

  children  or  the  physically  challenged. 

  Unsupervised use could result in fire or 

  personal injury.

3.  Use this appliance only for its intended 

  use  as  described  in  this  manual.  Do  

  not use attachments not recommend- 

  ed by the manufacturer.

4.  Never  operate  this  appliance  if  it  has 

  a  damaged  cord  or  plug,  if  it  is  not 

  working  properly,  or  if  it  has  been 

  dropped or damaged, or dropped into 

  water.  Do  not  attempt  to  repair  the 

  appliance.  Incorrect  reassembly  or 

  repair could cause a risk of fire, electric 

  shock, or injury to persons when the 

  appliance is used.

  Return the appliance to an authorized 

  service  centre  for  examination  and 

  repair.

5.  Keep the cord away from heated sur- 

  faces.  Do  not  allow  cord  to  contact 

  heated  surfaces.  Do  not  pull  or  twist 

  cord.  Let  appliance  cool  completely 

  before putting away.

6.  This  appliance  has  a  polarized  plug 

  (one blade is wider than the other). As 

  a safety feature, this plug will fit in a 

  polarized  outlet  only  one  way.  If  the 

  plug does not fit fully in the outlet, re- 

  verse  the  plug.  If  it  still  does  not  fit, 

  contact a qualified electrician. Do not 

  attempt to defeat this safety feature.

7.  Never  drop  or  insert  any  object  into 

  any opening or hose.

8.  Do not use outdoors or operate where 

  aerosol  (spray)  products  are  being 

  used or where oxygen is being admin- 

  istered.

9.  Do  not  use  an  extension  cord  to  

  operate appliance.

10. Surfaces of this appliance may be hot 

  when in use. Do not let eyes or bare 

  skin touch heated surfaces.

11. Do not place the steam nozzle directly 

  on  any  surface  or  on  the  appliance 

  power cord while it is hot or plugged  

  in. Use the stand provided.

12. Unplug this appliance before filling or 

  emptying. Do not overfill.

13. While  emitting  steam,  this  appliance 

  may cause burns if it is used too close- 

  ly to the skin, scalp or eyes, or if it is 

  used  incorrectly.  To  reduce  the  risk  

  of contact with hot water emitting from 

  steam vents test appliance before each 

  use by holding it away from body.

14. Do  not  operate  steamer  without  pro- 

  perly filling the water container.

15. Always  keep  the  hose  and  nozzle  

  elevated above the water container.

16. Never  yank  cord  to  disconnect  from 

  outlet, instead, grasp plug and pull to 

  disconnect.

17. Burns  could  occur  from  touching 

  hot  metal  parts,  hot  water,  or  steam. 

  Use care when removing water tank or 

  when  you  turn  a  steam  appliance  

  upside down – there may be hot water 

  in reservoir.

18. To reduce likelihood of circuit overload, 

  do  not  operate  another  high  wattage 

  appliance on the same circuit.

19. If  an  extension  cord  is  absolutely  

  necessary,  a  15  ampere  rated  cord 

  should  be  used.  Cords  rated  for  less 

  amperage may overheat. Care should 

  be taken to arrange the cord so that the 

  cord cannot be pulled or tripped over.

20. Never  pour  water  directly  into  re- 

  servoir. Pour water into water container 

  only.

21. When changing attachments, please be 

  sure  the  unit  is  off  and  no  steam  is  

  being  released,  to  avoid  contact  with 

  hot water.

22. Use  caution  when  changing  attach- 

  ments as they may contain hot water 

  from  condensation.  Ensure  that  the  

  attachments  are  dry  or  cooled  off  to 

  avoid contact with hot water.

SAVE THESE  

INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

UNPACKING INSTRUCTIONS

Place  the  box  on  a  large  sturdy  flat  sur-

face. Carefully remove the appliance from 

the packing material. Keep all plastic bags 

away from children.

STEAMER ASSEMBLY

STEP  1  -Attaching  the  Telescopic  

Support Rod

Insert the bottom of the metal telescopic 

support rod into the holder on the unit

base and screw the set screw until tight.

(See below)

(Caution: Do not overtighten.)

Attach  the  hose  storage  clip  by  pressing 

the clip onto the top section of the

telescopic support rod.

STEP 2 - Attaching the Steamer Hose

Be sure the unit is off. Attach “T” handle 

steam nozzle to steam hose. Twist clock-

wise  to  securely  lock  onto  hose.  Tighten 

by hand until it no longer turns.

Insert  angled  end  of  hose  into  steamer 

housing until click sound is heard. (Be

sure both connections at ends of hose are 

correct before operating appliance.)

Extend the telescopic rod and hang the “T” 

handle steam nozzle from the metal rod.

Hose  may  be  stiff  upon  removal  from 

box. Hose will relax after initial use. T-

handle will sit properly on pole support 

once hose is relaxed.

OPERATING 

INSTRUCTIONS

BEFORE FILLING THE WATER 

CONTAINER

Turn the water container upside down and 

inspect to make sure the valve and spring 

assembly are functioning. Place the con-

tainer in the reservoir and check that it is 

seated securely. If the container has been 

stored with water inside, it may be neces-

sary  to  remove  the  water  and  clean  the 

container.  Follow  the  steps  for  care  and 

cleaning.

FILLING THE WATER CONTAINER (PRIOR 

TO PLUGGING IN THE  APPLIANCE)

Remove  the  water  container  with  the 

handle  and  turn  upside  down.  Unscrew 

the valve in the centre of the base. Fill con-

tainer by holding container under a source 

of  running  cold  water  until  the  container 

is filled to the desired level. Do not over-

fill.  Screw  the  valve  cap  onto  the  water 

container and return the container to the 

upright position. Place the water container 

onto the base and make certain it is seated 

properly in the cavity.  

DO NOT FILL THE 

CONTAINER WITH HOT WATER.

GETTING TO KNOW YOUR STEAMER

USING COLLAPSIBLE HANGER

This unit comes with a collapsing hanger. 

To use the hanger pull up on the sides of 

the  attachment  until  the  arms  click  into 

the  open  position.  Hang  your  garment 

and steam away wrinkles. When finished, 

press release button on center of hanger 

to collapse for storage.

USING RETRACTABLE CORD REEL

This unit is supplied with a retractable cord 

reel for convenient storage.

1.   Pull the cord out until necessary length 

  is achieved.

2.  For storage, press the foot pedal; the 

  cord will retract into the unit.

OPERATING THE STEAMER

1.  Make sure the ON/OFF pedal is in the 

 

OFF position.

2.  Make  sure  all  hose  connections  are  

 

secure and tight.

3.  Make  sure  the  telescopic  rod  is  fully 

 

extended and the hose is not twisted 

 

or kinked.

4.  Plug  the  steamer  cord  into  a  normal 

 

electrical outlet.

5.  Push the ON/OFF pedal to the ON po- 

 

sition.

6.  The switch will light to indicate when  

 

power is on.

7.   If  the  low  water  lamp  is  illuminated, 

 

follow reset instructions.

8.  Steam  will  be  produced  from  the  

 

nozzle in about one minute.

Detachable cool-

touch handle with 

easy grip raised ribs

Removable 1.5 m 

(5’) cool-touch 

insulated hose 

with storage clip

Telescoping 

support rod 

hangs garments 

and nozzle 

and collapses 

for storage

Removable, 

easy to- fill, 

easy-to-clean 

2.5 L (85 oz) 

water con-

tainer with

integrated 

carry handle

4 large casters

Cord reel 

switch

On/Off pedal

Low water 

indicator lamp

Safety  

auto-off

Collapsible 

hanger

APPROVED - PROOF #5:

March 27, 2006

GS11RHC_IB.indd   1

3/28/06   12:53:10 PM

Summary of Contents for CTC71C













Reviews: