BATTERY REMOVAL INSTRUCTIONS
1. Using a small screwdriver, remove the screw on the
bottom housing at back of the clipper.
2. Remove the top housing by hand.
3. Now the battery is exposed so you can separate the
wire connectors. Carefully hold the wires on each
side of the connector and gently cut the wires. The
connector will separate and the batteries can be
removed from the inner housing. Bring the battery to
the nearest collection center for disposal or call the
toll-free RBRC information line at 1-800-8-BATTERY.
RBRC is a trademark of The Rechargeable Battery
Recycling Corporation. DO NOT throw the batteries
into the normal municipal waste system.
Never use cord to pull clipper. Never twist or otherwise
obstruct cord. To store, coil cord loosely and secure
with a twist tie.
SPECIAL OIL
To maintain the blades of your ConairPET
TM
clipper, be
sure to lubricate them regularly with oil. Gently place 2
or 3 drops of oil on the teeth of the blades before each
use. Turn clipper on for a minute, then turn off. This will
help maintain blade sharpness and prevent damage
from overheating. Oil is included in your clipper set.
This light, natural oil was formulated specifically for the
ConairPET
TM
clipper. Because it is the right oil to use,
it will not slow down the blades. Never use any other
product. There is no substitute for ConairPET
TM
oil. KEEP
OIL AWAY FROM CHILDREN.
