Conair CGS19A, User Manual

Page: 8 / 12

2. Hang your garment or fabric.
3. Pass the steam jets just above the fabric where the wrinkles are.
It may take a few passes to remove the wrinkles completely.
4. After use, empty any remaining water from the tank to avoid
leakage.
CREASE ATTACHMENT TIPS
The crease attachment is designed for use with one hand. Fabric
and garments should easily slide into the attachment.
Do not touch any part of the crease attachment when in use.
1. Hang your garment or fabric.
2. Pull the fabric taut from the bottom and insert into the crease
attachment.
3. Pass the steamer up and down around the fabric until the desired
crease is achieved and/or wrinkles are removed.
IRONING TIPS
When using the soleplate for pressing fabrics, follow these steps to
ensure professional results:
1. Be sure the temperature control dial is set to the correct tem-
perature for the fabric you are pressing. Fabric type and care
recommendations are found on the fabric label.
2. Do not let the soleplate sit in one place on the fabric as it may
scorch the fabric.