Conair CGS19A, User Manual

Page: 3 / 12

4. Use this appliance only for its intended use as described in this
manual. Do not use attachments not recommended by the
manufacturer.
5. Iron is not to be used if it has been dropped, if there are visible
signs of damage or if it is leaking. Do not attempt to repair the
appliance. Incorrect reassembly or repair could cause a risk of fire,
electric shock, or injury to persons when the appliance is used.
6. Keep the cord away from heated surfaces.
Do not allow cord to contact heated surfaces.
Do not pull or twist cord. Let appliance cool completely before
putting away. Loop cord loosely around appliance when storing.
7. Never drop or insert any object into any opening.
8. Do not use outdoors or operate where aerosol (spray) products are
being used or where oxygen is being administered.
9. Do not use an extension cord to operate appliance.
10. Surfaces of this appliance may be hot when in use. Do not let
heated surfaces touch eyes or bare skin.
11. Do not let the soleplate sit on any surface or on the appliance
power cord while it is hot or plugged in.
12. Unplug this appliance before filling or emptying.
Do not overfill.
13. While emitting steam, this appliance may cause burns if it is used
too close to the skin, scalp or eyes, or if it is used incorrectly. To
reduce the risk of contact with hot water coming from steam
vents, test appliance before each use by holding it away from
body.
14. Do not operate steamer without properly filling the water tank.
15. Never yank cord to disconnect from outlet; instead, grasp plug
and pull to disconnect.
16. Burns could occur from touching hot parts, hot water, or steam.
Use care when removing water tank or when you turn a steam
appliance upside down – there may be hot water in reservoir.
17. To reduce likelihood of circuit overload, do not operate another
high wattage appliance on the same circuit.