Comunello MSPI180H0B99, Instruction Manual

Page: 23 / 32

23
ENGLISH
1.1 SAFETY PRESCRIPTION
• For reasons of personal safety it is important to observe these instructions. Retain these instructions.
• This gear motor is designed to function safely if installed and used in compliance with the following instructions.
• The equipment must only be employed for residential uses and must be installed indoors.
• You are warned that incorrect instal lation can cause serious injuries. Follow all the installation instructions.
1.2 INSTALLATION PRESCRIPTIONS
• Do not use command buttons that can simultaneously operate the equip ment in both directions. Do not
command more than one gear motor with each button.
• The product cannot be installed for heights of less than 2.5 m.
• The deployment of a device that guarantees omnipolar disconnection from the mains with an opening of at
least 3 mm between the contacts is obligatory.
• Before installing the gear motor for operating the rolling shutter remove all superfluous wires and disable any
equipment not necessary for motorised movement.
• The control button must be placed in sight of the equipment, kept sepa rate from the moving parts and at a
height of at least 1.5 m.
• The actuating member of the manual release must be installed at a height less than 1.8 m.
1.3 OPERATING PRESCRIPTIONS
• The gear motor is designed for intermittent operation and is provided with an internal thermal protection that
interrupts power supply in the event of overheating caused by continued use. The gear motor automatically
resets itself after a few minutes. However, regular operation will only be possible when the gear motor cools
down.
• Do not let children play with fixed con trol devices. Keep the remote controls out of reach of children.
1 GENERAL PRESCRIPTION