Italian Movements
Italian Movements
12
5. REPLACING BATTERY
6. PROTECTION OF THE ENVIRONMENT
To delete all the groups stored proceed as follows:
1. Press and release the button SELG: the last group used is displayed by the leds.
2. Before all the leds switch off, press and keep pressed the button SELC and at the same time press the
button SELG
3. Keep pressed both the buttons for some seconds until the leds switch off: the groups have been deleted
4.4
Functioning of the button PROG and DIP-SWITCHES
The button PROG and the DIPSWITCHES program the functions of the control units controlled by the
transmitters R-CONTROL. Read carefully the section “PROGRAMMING OF THE FUNCTIONS BY R-CONTROL
TRANSMITTERS” in the handbook of the control unit or in the one of the tubular motor with integrated
electronic card.
Replace the battery when the radio range power decrease or the led light intensity becomes too feeble. Open
the door of the battery compartment and replace the two batteries respecting the polarity shown by picture 2.
Batteries contain pollutant elements, must be disposed of in accordance with environmental regulations
(Fratelli Comunello S.p.A. advise to use a specific disposal system).Transmitter contains pollutant elements
too; follow the same procedure to dispose.
Should the batteries lose electrolytic substances, please replace them immediately avoiding with care any
contact with such substances.
