Please follow the instructions to setup the Comtrend wireless router:
1.Connect your xDSL / cable modem to the WAN port of the router by Ethernet
cable.
B. Installation
2.Connect your computers and network devices (network-enabled consumer
devices other than computers, like game consoles, or a switch / hub) to an
available LAN port of the router.
3.Connect the A/C power adapter to the wall socket, and then connect it to the
Power socket of the router.
Please check all LEDs on the front panel. The Power LED should be steadily on,
WAN and LAN LEDs should be on if the computer / network devices connected
to the respective port of the router are powered on and correctly connected.
If the Power LED is still off and you’re sure that all cable connections are
connected properly, please contact your place of purchase for assistance.
12VDC
Reset/WPS
ADSL or
Cable Modem
12VDC
Reset/WPS
ADSL or
Cable Modem
Switch / Hub
12VDC
Reset/WPS
ADSL or
Cable Modem
AC Power
Switch / Hub
2