17
Browser Based Configuration Interface
The browser-based configuration interface enables you to
configure the access point’s advanced features. The access point
features a range of advanced functions such as MAC filtering,
MAC RADIUS authentication, VLAN configurations, up to 32 SSIDs
and many more. To access the browser based configuration
interface:
1.
Connect a computer to your access point using an Ethernet
cable.
2.
Enter your access point’s IP address in the URL bar of a web
browser. The access point’s default IP address is
192.168.2.2.
(Default IP address applies if No DHCP Server is detected).
3.
You will be prompted for a username and password. The
default username is “admin” and the default password is
“1234”, though it was recommended that you change the
password during setup (see
II-2. Basic Settings
).
If you cannot remember your password, reset the
access point back to its factory default settings. Refer to
I-5. Reset
III
V
Summary of Contents for WAP-EN1750C
Page 8: ...8 C D E i i ii ii iii iii...
