13
1.
To change the access point’s LAN IP address, go to
“Network
Settings” > “LAN-side IP Address”
and you will see the screen
below.
2.
Enter the IP address settings you wish to use for your access
point. You can use a dynamic (DHCP) or static IP address,
depending on your network environment. Click “Apply” to
save the changes and wait a few moments for the access
point to reload (Default setting is DHCP Enabled).
When you change your access point’s IP address, you
need to use the new IP address to access the browser
based configuration interface instead of the default IP
192.168.2.2.
3.
To change the SSID of your access point’s 2.4GHz wireless
network(s), go to
“Wireless Setting” > “2.4GHz 11bgn” > “Basic”
.
Enter the new SSID for your 2.4GHz wireless network in the
“SSID1” field and click “Apply”.
To utilize multiple 2.4GHz SSIDs, open the drop down
menu labelled “Enable SSID number
”
and select how
many SSIDs you require. Then enter a new SSID in the
Summary of Contents for WAP-EN1750C
Page 8: ...8 C D E i i ii ii iii iii...
