13
Chapter 3 Web User Interface
This section describes how to access the device via the web user interface (WUI)
using an Internet browser such as Internet Explorer (version 5.0 and later).
3.1 Default Settings
The factory default settings of this device are summarized below.
•
LAN IP address: 192.168.1.1
•
LAN subnet mask: 255.255.255.0
•
Administrative access (username: root, password: 12345)
•
User access (username: user, password: user)
•
Remote (WAN) access (username: support, password: support)
•
WLAN access: enabled
Technical Note
During power on, the device initializes all settings to default values. It will then
read the configuration profile from the permanent storage section of flash memory.
The default attributes are overwritten when identical attributes with different values
are configured. The configuration profile in permanent storage can be created via
the web user interface or telnet user interface, or other management protocols.
The factory default configuration can be restored either by pushing the reset button
for more than ten seconds until the power indicates LED blinking or by clicking the
Restore Default Configuration option in the Restore Settings screen.
Summary of Contents for VR-3033
Page 1: ...261099 037 VR 3033 Multi DSL Wireless Router User Manual Version A1 0 March 1 2016...
Page 57: ...56 5 3 3 UPnP Select the checkbox provided and click Apply Save to enable UPnP protocol...
Page 64: ...63 A maximum of 100 entries can be added to the URL Filter list...
Page 106: ...105 Enter the MAC address in the box provided and click Apply Save...
