The user must configure the IP Address and the Subnet Mask. To use the DHCP
service on the LAN, select the
Enable DHCP server
checkbox, and enter the Start
IP addresses, the End IP address and DHCP lease time. This configures the router
to automatically assign IP addresses, default gateway address and DNS server
addresses to each of your PCs.
Note that the router’s default IP address is 192.168.1.1 and the default private
address range provided by ISP server in the router is 192.168.1.2 through
192.168.1.254.
Select
Enable DHCP Server Relay
(if required), and enter the DHCP Server IP
Address.
7. The WAN Setup-Summary screen presents the entire configuration summary.
Click
Save/Reboot
if the settings are correct. Click
Back
if you wish to modify the
settings.
45
Summary of Contents for CT-5621
