manualshive.com logo in svg

Comtrend Corporation CT-5071E, User Manual

Share
Download
Comtrend Corporation CT-5071E User Manual Download Page 32

To configure a secondary IP address for the LAN port, click the box as shown here. 
 

 

 
 

Note 1: Enable DHCP Server Relay 

will not display if NAT is enabled in the 

previous step. 
 

Note 2:

 The router’s default IP address is 192.168.1.1 and the default private 

address range provided by the ISP server in the router is 192.168.1.2 through 

192.168.1.254. 
 

 
4. Click 

Next

 to display the WAN Setup-Summary screen that presents the entire 

configuration summary.  Click 

Save/Reboot 

if the settings are correct.  Click 

Back 

if you wish to modify the settings. 
 

 

 

 
5. After clicking 

Save/Reboot

, the router will save the configuration to the flash 

memory, and reboot.  The Web UI will not respond until the system is brought up 
again.  After the system is up, the Web UI will refresh to the Device Info page 
automatically.  The CT-5071E is ready for operation and the LEDs display as 

described in the LED description tables. 

 

31

Summary of Contents for CT-5071E















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands