manualshive.com logo in svg

Comtrend Corporation CT-5071E, User Manual

Share
Download
Comtrend Corporation CT-5071E User Manual Download Page 12

3.2.1 Default Settings 

During power on initialization, the CT-5071E initializes all configuration attributes to 
default values.  It will then read the configuration profile from the Permanent 

Storage section on the flash memory.  The default attributes are overridden when 
identical attributes with different values are configured.  The configuration profile in 

Permanent Storage can be created via the Web user interface or telnet user 
interface, or other management protocols. To load the factory default settings, hold 

the reset button down for at least 5 seconds until the power indicator blinks, or by 
clicking the Restore Default Configuration option in the Restore Settings screen. 

 
The following default settings are present when setting up the router for the first 
time.  The PC running the browser can be attached to the Ethernet. 

 

 

LAN port IP address: 192.168.1.1 

 

Local administrator account name: root 

 

Local administrator account password: 12345 

 

Remote WAN access: disabled 

 

NAT and firewall: disabled 

 

DHCP server on LAN interface: disabled 

 

WAN IP address: none 

 

 

11

Summary of Contents for CT-5071E















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands