Comtel CT-2100, Instruction Manual

Page: 27 / 32

27
do not want to be disturbed by every little sound made by your baby, then you can
choose Low Sensitivity Level or vice versa.
LOW BATTERY LED INDICATOR & BEEP WARNING
If the power LED turns into RED along with a beeping sound, the battery is low in
power. You have to recharge the battery by connecting the unit to the AC
Adaptor. COMTEL CT-2100™ can be operated even during recharging. The
batteries can be recharged approx. 500 times that corresponds to about 1 and ½
years of normal operation.
DIRECT RECHARGEABLE
Simply place 3 AAA rechargeable batteries (safety-enhanced type) into the battery
compartment and then connect the adaptor to the unit (DC Jack).
ANTENNA
The antenna is fixed and cannot be pulled out. Always place the unit to an up-right
position for better intercommunication.
LANYARD/STRAP HOLE
You can attach a strap or lanyard so that the unit can be safely and conveniently
carried with you especially when traveling outside.
RESET BUTTON
Use the reset button only when the device is down / has no response at all. Use a
pointing tool to gently press the reset button inside the small hole on the back
casing. The reset button will return you to the starting point of the device.
DETAILED OPERATION OF RECEIVER
BATTERY COMPARTMENT
Insert 1.2V AAA rechargeable battery x 3 to RECEIVER (safety-enhanced type) or
1.5V AAA Alkaline battery. Alternatively, use the AC adaptor to connect to
RECEIVER.
AC ADAPTOR:
Make sure that the AC adaptor input voltage is the same as the AC outlet voltage.
POWER BUTTON
This is the main power switch of the TRANSMITTER. Press the button to turn on
the unit.
CHANNEL A/B LED INDICATOR
To avoid interference, COMTEL CT-2100™ provides two user selectable
channels. Press and hold the menu button “M” until the channel LED “A” or “B”
flashes, press the up
▲
or down
▼
button to select the channel. Press the “M”