The table commands for the HD program are:
TAB HD PROGNUM sets the program number
TAB HD PROVIDER sets the DVB provider name
TAB HD SDT_NAME sets the DVB service name
TAB HD ATSC_NAME sets the ATSC channel name
TAB HD MAJORCH sets the ATSC major channel
TAB HD MINORCH sets the ATSC minor channel
The table commands for the SD program are:
TAB SD PROGNUM sets the program number
TAB SD PROVIDER sets the DVB provider name
TAB SD SDT_NAME sets the DVB service name
TAB SD ATSC_NAME sets the ATSC channel name
TAB SD MAJORCH sets the ATSC major channel
TAB SD MINORCH sets the ATSC minor channel
The commands for the Network Information Table (NIT) are:
TAB NIT ENABLE sets the enable
TAB NIT NAME sets the network name
TAB NIT NETID sets the network ID
TAB NIT MOD sets the modulation type
TAB NIT SYMBOL sets the symbol rate
TAB NIT CODE sets the code rate
TAB NIT SATPOS sets the satellite position
TAB NIT SATFREQ sets the satellite frequency
TAB NIT POLAR sets the polarization
TAB NIT WESTFLAG sets the east/west flag
>
>pid ?
The PID commands are:
PID MODE
The PID commands for the HD program are:
PID HD PMT
PID HD VIDEO
PID HD PCR
PID HD PGCA
The PID commands for the SD program are:
PID SD PMT
PID SD VIDEO
PID SD PCR
PID SD PGCA
The audio PID commands are:
PID AE.A
PID AE.B
PID AE.C
PID AE.D
Changing the PIDs is not recommended
If any PID is changed, the PID MODE will be set to manual
Changing the PID MODE back to auto will restore all PIDs to the correct
values
>
>ca ?
The commands for BISS encryption are:
CA BISS1 ENABLE Enable Biss1 encryption
CA BISS1 KEY Set key value for Biss1 encryption
CA BISSE ENABLE Enable BissE encryption
CA BISSE ESW Set key value for BissE encryption
CA BISSE SID Set the ID for BissE encryption
The commands for PGCA encryption of the HD program are:
CA HD ENABLE Enable PGCA for the HD program
CA HD KEY Set the PGCA key for the HD program
CA HD ADD Add a decoder to the HD authorization list
CA HD DELETE Remove a decoder from the HD authorization list
CA HD AUTH Authorize a decoder to view the HD program
CA HD DEAUTH Deauthorize a decoder for the HD program
CA HD LIST Display the HD authorization list
CA HD CLEAR Remove all decoders from the HD list
The commands for PGCA encryption of the SD program are:
CA SD ENABLE Enable PGCA for the SD program
CA SD KEY Set the PGCA key for the SD program
CA SD ADD Add a decoder to the SD authorization list
CA SD DELETE Remove a decoder from the SD authorization list
CA SD AUTH Authorize a decoder to view the SD program
CA SD DEAUTH Deauthorize a decoder for the SD program