Comtech EF Data SLM-5650C CyberLynx, Installation And Operation Manual

Page: 131 / 168

SLM-5650C / SLM-5650C-ODU Satellite Modem
Revision 1
Serial Remote Control 7–37 MN-SLM-5650C
7.5.9 ODU Commands / Queries
The instruction codes that follow control 10 MHz references and power for Outdoor Units.
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
BUC 10 MHz
Reference
BFR= 1 byte Command or Query.
Used to Enable/Disable the BUC 10 MHz Reference, where:
0 = Disable
1 = Enable
Example: BFR=0
BFR=
BFR?
BFR*
BFR#
BFR? BFR=x
(see Description of Arguments)
LNB 10 MHz
Reference
LNR= 1 byte Command or Query.
Used to Enable/Disable the LNB 10 MHz Reference, where:
0 = Disable
1 = Enable
Example: LNR=0
LNR=
LNR?
LNR*
LNR#
LNR? LNR=x
(see Description of Arguments)
LNB Power
Control
LPS= 1 byte Command or Query.
Used to set the LNB Power, where:
0 = Off (0V)
1 = 13V
2 = 18V
3 = 19V
4 = 24V
Example: LPS=0
LPS=
LPS?
LPS*
LPS#
LPS? LPS=x
(see Description of Arguments)
LNB Lower
Current Limit
LNL= 3 bytes Command or Query.
Used to set the LNB Current Monitor lower limit, where xxx is in the
range from 0 mA to 500 mA. Must be less than the currently set Upper
Current Limit.
Example: LNL=000
LNL=
LNL?
LNL*
LNL#
LNL? LNL=xxx
(see Description of Arguments)
LNB Upper
Current Limit
LNH= 3 bytes Command or Query.
Used to set the LNB Current Monitor upper limit, where xxx is in the
range from 0 mA to 500 mA. Must be greater than the currently set
Lower Current Limit.
Example: LNH=500
LNH=
LNH?
LNH*
LNH#
LNH? LNH=xxx
(see Description of Arguments)
LNB Voltage
Monitor
N/A 4 bytes Query only.
Used to monitor the LNB Voltage, where xx.x is in V.
Example: LVO=24.0
N/A LVO? LVO=xx.x
(see Description of Arguments)