Comtech EF Data SLM-5650C CyberLynx, Installation And Operation Manual

Page: 130 / 168

SLM-5650C / SLM-5650C-ODU Satellite Modem
Revision 1
Serial Remote Control 7–36 MN-SLM-5650C
7.5.8 Gigabit Ethernet Interface Commands / Queries
The instruction codes that follow are valid only when the internal 10/100/1000 BaseT Gigabit Ethernet Interface is installed in the
SLM-5650C Satellite Modem.
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
GBEI Flow
Control
GFC= 1 byte Command or Query.
Used to Enable/Disable Pause Frame flow control on the internal GBEI
Interface, where x is:
0 = Disabled
1 = Enabled
Example: GFC=0
GFC=
GFC?
GFC*
GFC#
GFC? GFC=x
(see Description of Arguments)
GBEI Wan
Buffer Length
WBL= 3 bytes Command or Query.
Used to set the WAN Buffer (transmit) Length, where xxx is in range
from 020 mSec to 240 mSec
Example: WBL=020
WBL=
WBL?
WBL*
WBL#
WBL? WBL=xxx
(see Description of Arguments)