Comtech EF Data CDM-550T, Manual

Page: 178 / 178

CDM-550T Satellite Modem Revision 0
KST-2000A FSK Remote Operation MN/CDM550T.AA1
10 MN/CDM550T.AA1
1.2.29 ODU,ENABLE,INFO) FW (Firmware)
FIRMWARE INFO: M&C
FW: 9364-1- VER: 01.01.01
Note: The blinking cursor is on the M &C. Use the [
↑
] [
↓
] keys to view additional
firmware information for the Up Converter, Down Converter, and HPA.
1.2.30 (ODU,ENABLE) STATUS
STATUS: PS:OK RF:OK UC:OK
LNA:OK AG:OK HP:OK DC:OK
This menu displays summary information. The operator may select 1 of 6
detailed status windows. Use the [
←
] [
→
] keys, then press <ENTER>.
The cursor may be moved over 6 of the 7 status parameters to view more
detailed status information. These screens are continually updated while being
viewed.
AG
= AGC Status
DC = Down Converter
HP = HPA Status
LNA = Low Noise Amplifier (No further detail)
PS
= Power Supplies
RF = Reference
UC = Up Converter
FT = Fault
NA = Not Applicable
OK = OK – No Fault
P/Supplies: 7V:OK 17V:OK
-7V:OK 12V:OK
REF: WARM 72M:OK RANGE:NA
SRC:INT XLK:NA PHASE:NA
UPCONV STATUS: OVRTMP:OK
SSYN:OK KSYN:OK PRG:OK
AGC STATUS: EIP:OK
LOOP:OK IIP:OK
HPA: OVERTEMP:OK 9.75V:OK
-5V:OK BIAS:OK PRG:OK
DNCONV STATUS: OVRTMP:OK
LSYN:OK KSYN:OK PRG:OK