2
Getting started
1. Charging the receiver
BT-01-R comes with a built-in rechargeable battery. Prior to initial use, it is
recommended to charge fully the battery.
When the receiver is low on power, the LED flashes Red once and the
receiver emits three tones every 20 seconds. Please recharge the battery.
Connect the included USB charging cable to a standard USB charger and
the other end to the charging jack of the receiver. The Red LED will be on
while charging. It takes about 2.5 hours to fully charge the battery. When
charging is complete, the Red LED will turn off.
Remarks:
If the receiver can’t be turned off, you will need to charge it briefly to be
able to turn it off.
Please don’t attempt to take out the battery from the receiver, as this
might damage it.
Warning:
The battery is recyclable.
The BT-01-R should not be exposed to direct sunlight or excessive heat.
2. Turning on/off the receiver
Function
Operation
LED indicator
Power on
Press and hold MFB button for
3
～
4 seconds
Blue LED is on for
1 second
Power off
Press and hold MFB button for
3
～
4 seconds
Red LED is on for
1 second
