Comset CM950W User Manual Download Page 52

Page: 52 / 111

CM950W User Manual

www.comset.com.au



Get Cell Status Command

Input the command for “router cell status” operation, default is

“cellstatus”.



Set cell link-up Command

Input the command for “router cell link up” operation, default is

“cellup”. If the router gets this command, the Router Cell will go online.



Set cell link-down Command

: Input the command for “router cell link down” operation,

default is “celldown”. If the router gets this command, the Router Cell will go offline.



DIO_0 Set Command

: Input the command for I/O port 0. For SMS feature, please keep the

default parameters.



DIO_0 Reset Command

: Input the command for I/O port 0. For SMS feature, please keep

the default parameters.



DIO_1 Set Command

: Input the command for I/O port 1. For SMS feature, please keep the

default parameters.



DIO_1 Reset Command

: Input the command for I/O port 1. For SMS feature, please keep

the default parameters.



DIO Status Command

Input the command for I/O port status. For SMS feature, please keep

the default parameters.



Wifi on Command

: input the command for turning on WiFi. For SMS feature, please keep

the default parameters.



Wifi off Command

input the command for turning off WiFi. For SMS feature, please keep

the default parameters.



SMS alarm



SMS Alarm

: Enable the SMS alarm feature.



Enable Signal Quality Alarm

: Enable Signal Quality Alarm feature.



Signal Quality Threshold

: Set the signal quality threshold.

Summary of Contents for CM950W
















































































































Search results

Summary of Contents for CM950W

Reviews:

Related manuals for CM950W

Brands by name

Popular brands

Comset CM950W, User Manual

Search results

Summary of Contents for CM950W

Reviews:

Related manuals for CM950W

Brands by name

Popular brands