Comset CM950W User Manual Download Page 39

Page: 39 / 111

CM950W User Manual

www.comset.com.au



Enable

: Enable ICMP check feature.



Host1 to ping / Host2 to ping

The domain name or IP address for checking the network connection.



Ping timeout

: After a ping packet is sent, if the response packet is not received before the timeout, then

this ping has failed.



Max retries

: When the number of failed pings reaches the “Max retries”, this will trigger the action

configured in item “Action when failed”.



Interval between pings

: The time between two pings in minutes.



Reconnect

: Reconnect cell interface if ping failed.



Action when failed

: the options are “Restart module” and “Restart router”. “Restart module” will restart

the radio module. “Restart router” will restart the whole system including the radio module.

Summary of Contents for CM950W
















































































































Search results

Summary of Contents for CM950W

Reviews:

Related manuals for CM950W

Brands by name

Popular brands

Comset CM950W, User Manual

Search results

Summary of Contents for CM950W

Reviews:

Related manuals for CM950W

Brands by name

Popular brands