www.comset.com.au
m
11
CM210Q-W Router User Manual
Before connecting any cables, please disconnect the power source.
2.3.2
Ethernet Cable Connection
Use an Ethernet cable to connect the LAN port of the cellular Router to the LAN port of your
PC or laptop computer.
2.3.3
Serial Port Connection
If you want to connect the router via a serial port to your laptop or any other device, you
need to prepare a serial cable or a RJ45 cable. One end connects to the computer serial
port, the other end connects to the console port of the router or the terminal block.
Before connecting the serial cable, please disconnect any power source.
2.3.4
Power Supply
The CM210 router supports a wide range of DC voltage between 5VDC and 32VDC.
2.3.5
Review
After inserting the SIM/UIM card(s) and connecting the Ethernet cable and antennas,
please connect the power adaptor or the power cable.
Please connect the antennas prior to powering up the router, otherwise you
may get a poor signal due to a mismatching impedance.
Notice:
Step 1 Check the antennas’ connection.
Step 2 Check the SIM/UIM card is inserted.
Step 3 Power up the industrial Router.
