22
2.
Channel Lock” please press [VOL
] to set „ON“ to protect the channels which are previously marked as “lock” in
the Edit menu with a PIN code. The default password is “0000”.
3.
New Password
: You can change the default password from „0000“ to any individual. Please note, that once you lost
your password the Receiver becomes a service issue.
4.
Confirm Password
5.
Press [EXIT] to leave the menu.
3.4.7
OSD Setting
1. OSD Timeout: When you switch channels in full screen, there will show up some information about current channel on
the lower of the screen. And regarding to the duration of these information show up on the screen, you can press
[VOL
] key to set the time
. The range of the duration is “1 second ~ 10 seconds”.
2. OSD Transparency: You can press [VOL
] key to select the values. There are 5 levels of transparency, 10%, 20%,
30%, and 40% and “NO” (means no transparency function).
3. OSD Banner position: You can adjust Banner position within 14 levels.
3.4.8
Favorite
You can rename
Favorite items by your willing.
3.4.9
Firmware Information
If you select “Firmware Information” you will have the following screen:
This is for service issues only.
3.4.10 CAS information
If you
select “CASInformation” you will have the following screen:
This is for service only.
3.4.11 Restore default values:
Default above user options.
3.5 Installation
Press [MENU] key to enter into the main menu,