COMRADE R8, User Manual

Page: 5 / 14

We suggest you to check the packing box first before using it. Please carefully unpack
the box and check if all the items which listed in following table are received. If you find
any loss or damage, please contact your dealer immediately.
3.-UNPACKING AND CHECKING EQUIPMENTS:
5.1.- INSTALLING THE ANTENNA:
5.- INSTALLATION OF ACCESSORIES:
03 04
Note:
*
Items included in the package, may differ from those listed in the table above depending
on the country of purchase. For more information, consult your dealer or vendor.
4.- OPTIONAL ACCESSORIES:
Note:
*
Consult the dealer or retailer for information about options available.
Install the antenna as shown in the figure below and turn it clockwise until it stops.
Note:
*
When installing the antenna, don*t rotate it
by its top, holding it by its base and turn.
*
If you use an external antenna, make sure
the *SWR* is about 1.5:1 or less, to avoid
damage to the transceiver's final transistors.
*
Do not hold the antenna with your hand or
wrap the outside of it to avoid bad operation
of the transceiver.
*
Never transmit without an antenna.
5.2. - INSTALLING THE BELT CLIP:
If necessary, install the belt clip at the rear of
the battery compartment cover as shown in
the figure below.
Note:
*
Do not use any kind of glue to fix the screw
on the belt clip.
*
The solvents Glue may damage the battery
casing.