RegulatoR
®
, Keyless Locking 12
Programming Single Use Mode / Standard Mode
Single Use Mode allows for a revolving user code so multiple people may use
the lock without having to reprogram the RegulatoR each time.
Note: This mode cannot be used with Self Lock with SlamCAM.
Standard Mode RegulatoR operates with a fixed code. To change the code,
follow the Changing the User Code steps on page 10.
To change the RegulatoR to Single Use or Standard Mode, follow the steps on
page 9 to enter programming mode.
There is a 10 second programming time limit between each step. If RegulatoR
times out or an error is made, programming will end and you will need to enter
programming mode again.
1.
Place RegulatoR into programming mode (see page 9).
a.
To turn Single Use Mode “ON”: type 51 and then press
ENTER.
OR
b.
To return to Standard Mode: type 50 and then press ENTER.
2.
If successful, the green indicator light will illuminate for 1 second.
Note: Returning to Standard Mode will reset the factory user default code
(1234).
Continue programming or press 9 and then ENTER to exit programming.