8
a. Remove the plastic cover from the strike plate. Drill 9/64”
hole in second opening of strike.
b. If adjustment of strike is needed, loosen up the first strike
screw and adjust the strike. Tighten up the screw.
c. Drill hole for second screw and install.
d. Reattach the plastic strike cover and secure with two
tamper resistant machine screws.
150 Series
—
Installing the
horizontal
mount refrigerator kit continued
Finish installation of the strike (ONLY
if drilled installation of strike was used)
Step
4:
150 Series
Refrigerator eLock — Accessories
HID is a trademark of HID Corporation.
Note: product images are not to scale.
q
Add, edit, view and delete users / supervisors
and their credentials
q
Add, edit and delete CompX eLocks
®
q
Assign access rights between users / supervisors
and CompX eLocks
®
in the database
q
Download, view, save, print, archive and delete
audit trails
q
Dual credential access available
q
Set real time clock
q
Time based access restrictions
q
Create user groups
q
Windows
TM
based
LockView
®
software
LockView is a Registered
Trademark of CompX
International. Windows is a
trademark of the Microsoft
Corporation. Specifications
may vary based on user
application.
HID
®
Prox User,
Supervisor Card
Part Number:
EL-2004-PC
(no logo)
EL-ICLASS-C
(HID iCLASS user, supervisor card)
LockView
®
Software Kit
(1 LockView
®
travel drive, 1 USB cable)
Part Number:
LOCKVIEW-5PRO
HID
®
Prox Tag
Part Number:
EL-2004-PT
EL-ICLASS-T
(HID iCLASS tag)
Screwdriver
(T-15 pin-in-head Torx 6-lobe)
Part Number:
EL-DRV-15
Bit
(T-15 pin-in-head Torx 6-lobe)
Part Number:
EL-BIT-15
Part #: 334008-0000-00
Copyright 2017 © CompX Security Products / 847.752.2500 / compx.com / 715 Center St., Grayslake, IL 60030
Any companies and/or products referred to herein are marks or registered trademarks of their respective companies, owners and/or mark holders.
